ARCODE Lift Command Panels

> Connection with cabinet units

Serial cabin communication via CANbus line Between control panel and revision box
One-to-one connection with plug-in flat cable Plug-in between cabin button and inspection box
one-cable plug-in connection

> Connection with floor units

Serial floor communication via CANbus line or parallel floor connection with MSP16 card.
Additive, well CANbus line with plug-in cables from floor to floor, extending throughout the entire well
Pluggable connection with plug-in cable attached to the well CANbus line for each floor for floor buttons

> Compact inspection panel on cabinet

Easy to use mobile device with 2 meters long hand terminal device

> Door contacts connection

Door contact installation with plug-in cables extending from floor to floor, extending all along the shaft
Connection with socket cables attached to the door contact system on each floor for the plug-lock contacts of the landing doors.

> Pit installation

Socket connection via a single cable with the bottom of the pit box and mobile and easy use with the hand terminal

> Cab position information

With encoder system With magnetic switch and magnets

> Cable coding

Fast fault resolution thanks to the cable labeled with colors and texts

> Automatic door control

All kinds of automatic door control Independent door control according to the stops with double door support
1 door control inputs-outputs in the inspection box and 2 in the control panel

> Auto floor

With 1 phase 220VAC UPS or battery group connection Easy direction or to the desired floor

> Door bridging

Door early opening and door open level renewal with door bridging circuit on DBR card

>Programmable I/O

Freely programmable inputs and outputs on the motherboard, cabin cards and floor cards

> Test functions

Special test function for testing car and landing button connections

> Remote control

Ability to control ARCODE from any point with the hand terminal connected to the CANbus line

> Cabin-well feeding circuits

Residual current protected cabin and well supply fuses

> Emergency alarm

Emergency alarm siren (with buttons from the top of the cabin and the bottom of the well)

> Safety circuit connections

Special connections for safety circuits in control panel, inspection box and pit box

> Eligibility

Full compliance with EN 81-20 standards as a complete elevator control system with EMC test report