Menu
Your Cart

Control Panels

Control Panels

The elevator control panel, which is not seen by an ordinary elevator user, is the brain and power source that supplies the power to the entire machine system, controls all work steps moment by moment, and ensures all safety.

It is the elevator control card that allows you to keep the elevators under control and to give the necessary instructions for the direction you want. The elevator control card is located in the elevator panel. The determination of the stops and the stopping of the elevator at the desired time are provided with the help of these cards. These cards, which enable automatic doors to be opened and closed without feeling vibration, also have an emergency warning alarm. It provides the opportunity to safely transport you to the nearest floor in case of sudden danger.

Models10 OHM 1000W Braking Resistor18 OHM 1000W Braking Resistor25 OHM 1000W Braking Resistor40 OHM 1000W Braking Resistor50 OHM 1000W Braking Resistor..
Models14 A 3 Phase Choke Coil17 A 3 Phase Choke Coil26 A 3 Phase Choke Coil35 A 3 Phase Choke Coil50 A 3 Phase Choke Coil75 A 3 Phase Choke Coil..
With the Arkel 2X Dotmatrix, you can control the volume of the buttons, program/update via CANbus, and adjust the volume for the gong with the trimpot labeled Volume on the cassette cards.Dimensions (mm) 73×77×17 (73x64x17) Visible Area (mm) Length × Width 46x30 (2 digits 30 mm displa..
The Arkel 3X Dotmatrix allows you to control the volume of the button, program/update via CANbus, and adjust the volume for the gong with the trimpot labeled Volume on the cassette cards.Dimensions (mm) 75x131x17 (60x115x17) Visible Area (mm) Length × Width 46x30 (2 digits 30 mm displ..
VVVF Speed ControllerPower Circuit 60-120V battery pack can be powered by a UPS with 220VAC output power Control Circuit Viability with external 24Vdc supply Over Speed ​​Warning At high speeds of 0,63 m/s Serial Communication Serial communication via RS-485 port w..
ADrive OptionsIt is the button and instrument panel for remote access to Adrive.Display Graphics-LCD display with 128x64 pixel resolution Connection With standard CAT5 network cable with RJ-45 connector Facilities Practical and comfortable operation with 6-key keyboard..
Arkel Apre is a Clamping Control Unit for EN81-1 + A3 Standards. With the addition of the Connection Card Battery, it continues to work in the event of a mains interruption. Battery charging is done by ApRe card.peed Regulator Locking Coil Voltage 12 Vdc or 24 Vdc. Supply and battery connection..
Integrated Elevator Control UnitARCODE is an innovative product that achieves many firsts in the industry. It is an integrated elevator control unit that includes a VVVF driver, control units and a floor delivery system.Motor Control Synchronic (gearless) Machine, Asynchronic (geared) Machine&n..
> Connection with cabinet unitsSerial cabin communication via CANbus line Between control panel and revision boxOne-to-one connection with plug-in flat cable Plug-in between cabin button and inspection boxone-cable plug-in connection> Connection with floor unitsSerial floor communication via C..
Arkel Control Panels MODELS5,5 KW (14A), 7,5 KW (17A), 11 KW (26A) COMPLIANCE WITH STANDARDS  EN 81-20 ENGINE CONTROL  SYNCHRON AND ASYNCHRONOUS MACHINE ENCODER OPTIONS 5V TTL, 10-30V HTL, EnDAT, SSl, SinCos, BlSS INPUT VOLTAGE  AC 3 PH, 320-420V, 50/60 HZ&..
Number of Stops 16 Drive Type Traction (VVVF gearless machine; MRL) Cabling Serial or parallel connection options with LOP's and COP's Arcode compatible serial communication units Car Positioning Magnetic switches or motor encoder Door Bridging Available&..
Internet of ElevatorsRemote monitoring and fault detection..
Showing 1 to 12 of 51 (5 Pages)